Description 100kW MAN biogas GenSet HTG-100GF
Are you still wasting time looking for Biogas Genset
suppliers in United States?
Do you still worry about product quality assurance?
Are you late in deciding to buy because of insufficient budget?
If you have these worries, stay and see.
NEW 100kW MAN biogas Generator Set HTG-100GF 50Hz Applications
COP (kW) 100
Engine Model Man E0836LE302 ( Germany Original)
Rotation Speed (RPM) 1500
MAN series biogas gensets & CHPs are driven by MAN engines originally made in Germany, one of the world top engine brands all over the world.
MAN Gen-pack minimizes the design changes for installation which able to avoid cost and space impacts
This series of Biogas generator can be used in Biogas plant, Biogas digester, and others, as a 24-hour uninterrupted power or standby power.
All HAITAI MAN gensets are built with the best technology and original components.
MAN engines are ISO 9001: 2008 certified; which demonstrates its commitment to quality under European standards.
Advantages of biogas Power Generator Set High efficiency and Cost effective
Low Emissions due to advantage technologies
Low space requirement due to compact design
Reliable service life resulting from application-specific design
Powerful to ensure uninterrupted operation
Adapt to harsh conditions
Low operating and maintenance costs
Longer machine life: Special design engine has longer life with overhaul time 20000 hours.
Easy operation: The Gas Power Generator is easy to operate.
The Gas Power Generator use most advanced lean burn technical for high efficiency
Main parts like ECU, Gas Mixer, Pressure Regulator, etc are origin made in USA& Italy.
Control PanelThe DSE7310 is an Auto Start Control Module and the DSE7320 is an Auto
Mains (Utility) Failure Control Module suitable for a wide variety of single, diesel or gas,gen-set applications
Attachment (Optional Parts) 20ft Container canopy Scientific and efficient Special sand-proof waterproof blinds with illumination.
Soundproof Canopy (Super Silent canopy)Containerized Canopy
CHP system (Exhaust Heat Collector)1. The unique spiral winding structure increases the turbulence effect, and the heat exchange capacity per unit area is 3-7 times that of the traditional heat exchanger.
2. High heat transfer coefficient, high heat exchanger heat transfer efficiency, good heat transfer effect, high heat transfer coefficient up to 14000W/m·k, energy saving effect is remarkable.
3. Small size. With only one-tenth of the traditional tube and shell heat exchangers, it takes up less space and reduces infrastructure and installation and maintenance costs.
4. Using a small clearance design to increase the flow rate, the heat exchanger is not easy to foul, and the use and maintenance costs
are low.
5. Advanced design concept, the length of the heat exchange tube is 3-4 times the height of the cylinder, the material stays longer and the
heat transfer is more fully.
6. Spiral-wound elastic tube bundle design can effectively eliminate pipe vibration and stress due to thermal expansion and contraction deformation.
7. Unique 90 degree connection, heat exchangers all participate in heat exchange,
no dead ends and stagnant areas, reduce fluid resistance.
8. Counter-current heat transfer, asymmetric flow design, in the vapor-liquid heat transfer field has other advantages that can not be compared with heat exchangers.
Automatic Paralleling and Gridconnect Control SystemThis system can connect generator sets in parallel or connect the generator set to the grid automatically.
CHP/Cogeneration/CCHP/Trigeneration
Remote Control
PMG Alternator
Oil and Water Heater
High Voltage Alternator 6.3kv and 10.5kv, High Voltage Electrical Control Cells (PT Cabinet
CT Cabinet
High Voltage outgoing cabinet
DC Panel, Groud Resistance Cabinet and low voltage distribution cabinet etc)
Supply Scope High quality gas enigne, brushless Alternator with AVR, Control Cabinet, Advanced Ignition System,
IMPCO Air-Fuel Mixer Made in USA,Stable Electronic Speed Governor, High Performance Flame Arrester.
Non-Maintenance Start Batteries, MCCB, Radiator Fan, Muffler, Air Filter, Installation accessories, Tool kit, Manual books.
Remarks: Both 50Hz and 60Hz are available.
Special voltages available.
Alternator brand Stamford, Leroy Somer, Marathon are optional.
Controller brand Deepsea, Comap are optional.
Special requirements for Soundproof Canopy, ATS, Parallel & Synchronization Control, CHP and Biogas Pre-treatment Machinery are optional
The specification of the 100kW MAN biogas GenSet HTG-100GF
Rotation Speed (RPM) 1500
Overall dimension (LxWxH)(mm) 3700*1150*175
Dry Weight (kg) 2200
Engine Model MAN / E0836LE302
Rated Power/ Standby Power 110kW
Engine Type In-line, Four Stroke
Rated Speed 1500 rpm
Cylinder No. 6 In- line
Bore * Stroke 108×125mm
Start Method Electric
Air-fuel Ratio 11:1
Crankshaft Rotation Direction Inverse Hour (From Flywheel)
Cooling Method Liquid
Aspiration Type Turbocharged
Speed Governor Electronic
Gas Mixer Formation Pre-Mix
Displacement 6.87 L
Thermal Efficiency 47.6%
Mechanical Efficiency 41.9%
Total Efficiency 89.5%
Emissions status NOx <500 mg/Nm3
Alternator Technical Parameters
Alternator Model Faraday / FD3C Rated Power 100kW
Standby power 110kW Power factor 0.8
Excitation Type Brushless Insulation class Class H
Connection 3-pahse, 4-wire
Cooling Air cooled
Protection Class IP23
Voltage Regulation Mode AVR (Automatic)
Electrical performance
Voltage setting range: ≥+-5%
Steady-state voltage regulation: ≤+-1%
Transient voltage deviation(100% Sudden power reduction) ≤+25%
Transient voltage deviation(Sudden power plus) ≤-20%
Voltage stabilization time(100%Sudden power reduction) ≤6S
Voltage stabilization time (Sudden power plus) ≤6S
Steady - state frequency regulation ≤5%
Frequency fluctuation rate ≤1.5%
Transient frequency deviation (100% Sudden power reduction) ≤+12%
Transient frequency deviation (Sudden power plus) ≤-10%
Frequency recovery time (100% Sudden power reduction) ≤5S
Frequency recovery time (Sudden power plus) ≤5S